Universal Rc Car
Tire Saver Wood Display Stands Custom Extensions - Add-on Kits
USD $2.75
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Optional Add-On Kits for Universal Base Stands (Stands not Included) (Check my other listings to find the universal base stands)
These kits are intended to work with my universal base stands for R/C cars and trucks, but may have other uses. Kits will offset the overall width of the stands by 10mm (except the Stacker) depending on inner/outer placement. All kits work with all universal stands as well as each other and will allow for offset heights on the left and right side. Hole alignment and screw size are the same for all.
To order multiple kits, just add each to cart and checkout. I only charge shipping on the first item. Kits are made to order so please allow 2-3 days processing time. Standard Kit #1
• A possibility for 6 different options: round top, 13mm scoop, 15mm jaw, 7mm point, 5mm pin with 15/20mm plate
• Adds 2-20mm in height
• Includes stainless steel hardware (8 screws w/washers & nuts) Stacker Kit #2
• A possibility for 4 different options: small scoop, small nub, 13mm scoop, 15mm jaw
• Adds 1-40mm in height
• Includes stainless steel hardware (8 screws w/washers & nuts) Jaw Kit #3
• A possibility for 5 different options: round top, 20mm jaw, 30mm jaw, 15mm vee, 5mm nub
• Adds 2-20mm in height
• Includes stainless steel hardware (8 screws w/washers & nuts) Wide Jaw Kit #4
• A possibility for 3 different options: round top, 45mm jaw, 60mm jaw
• Adds 3-25mm in height
• Includes stainless steel hardware (8 screws w/washers & nuts) Extension Kit #5
• Made from 1/8 Baltic Birch
• Use with other kits to add height (roughly 5-45mm but varies based on kits)
• Includes stainless steel hardware (8 screws w/washers & nuts) Slide Bar Kit
• One bar plus 2 ring supports per kit (two kits are required if using for front & back)
• Bars are 7” wide and include additional support rings to help add stability
• Stand ends slide on for custom widths and bars can be cut to length*
• “A” is for 3-inch & 4-inch tall stands
• “B” is for 2-inch & 2.5-inch tall stands *PLEASE NOTE: Some basic skills may be required to get the best fit including sanding, gluing, cutting. I try to intentionally make these a tight fit but can’t guarantee the tolerances due to variations in the wood and humidity.
These kits are intended to work with my universal base stands for R/C cars and trucks, but may have other uses. Kits will offset the overall width of the stands by 10mm (except the Stacker) depending on inner/outer placement. All kits work with all universal stands as well as each other and will allow for offset heights on the left and right side. Hole alignment and screw size are the same for all.
To order multiple kits, just add each to cart and checkout. I only charge shipping on the first item. Kits are made to order so please allow 2-3 days processing time. Standard Kit #1
• A possibility for 6 different options: round top, 13mm scoop, 15mm jaw, 7mm point, 5mm pin with 15/20mm plate
• Adds 2-20mm in height
• Includes stainless steel hardware (8 screws w/washers & nuts) Stacker Kit #2
• A possibility for 4 different options: small scoop, small nub, 13mm scoop, 15mm jaw
• Adds 1-40mm in height
• Includes stainless steel hardware (8 screws w/washers & nuts) Jaw Kit #3
• A possibility for 5 different options: round top, 20mm jaw, 30mm jaw, 15mm vee, 5mm nub
• Adds 2-20mm in height
• Includes stainless steel hardware (8 screws w/washers & nuts) Wide Jaw Kit #4
• A possibility for 3 different options: round top, 45mm jaw, 60mm jaw
• Adds 3-25mm in height
• Includes stainless steel hardware (8 screws w/washers & nuts) Extension Kit #5
• Made from 1/8 Baltic Birch
• Use with other kits to add height (roughly 5-45mm but varies based on kits)
• Includes stainless steel hardware (8 screws w/washers & nuts) Slide Bar Kit
• One bar plus 2 ring supports per kit (two kits are required if using for front & back)
• Bars are 7” wide and include additional support rings to help add stability
• Stand ends slide on for custom widths and bars can be cut to length*
• “A” is for 3-inch & 4-inch tall stands
• “B” is for 2-inch & 2.5-inch tall stands *PLEASE NOTE: Some basic skills may be required to get the best fit including sanding, gluing, cutting. I try to intentionally make these a tight fit but can’t guarantee the tolerances due to variations in the wood and humidity.
Price type
IN STOCK
OUT STOCK
.
