FMS FCX24 Sun Visor and Air Cleaner Snorkel Kit With Hardware Drop Visor

Bolt on Some Attitude to your FCX24!

Complete Kit, Ready to install!

Complete kit to change the styling of your FCX24! This is a 9 part kit, it includes a Drop Sun Visor (Angry style) 4 Pcs M2x8mm aluminum screws (chrome) Air Cleaner with Mushroom cap, spacer and washer for mounting

No Drilling! Uses stock holes!

Delete your flimsy windshield wipers and replace them with the visor, that screws into the windshield wiper holes. the replacement air cleaner tank screws in to the existing snorkel hole, and looks square and level compared to the old one that is secured with hot glue.

Two different styles!

I sell two different styles of sun visor and air cleaner, choose which one compliments your build best! to find the alternate style, check my Pricetronic seller page! McCue-RC
Interested in more FCX24 or SCX24 parts? check my Pricetronic Store for extended trailing arms, bumpers, steering links, cosmetic mods, and the McCue RC Mantis Links!

Install Instructions

Remove Hard body from vehicle. 

Use plyers to firmly grip windshield wipers and snorkel, slowly pull and twist. you can always use hot glue to re attach them if you want, so save them!

screw the sun visor into the cab using 2x M2x8mm screws. you may need to flex it slightly to align the holes because the screws are angled to match the contours of the cab. remember that you are threading a 2mm metal screw into a ~1.8mm plastic hole. You are cutting the threads as you tighten it. once it is snug, don't go any more!

Assemble the air cleaner, one screw goes through the mushroom cap and through the small spacer ring, then into the tank. 

thread the final screw through the flat washer with the countersunk groove for the screw head.

the final step is to use the screw and plastic washer to attach the air cleaner to the side of the fender. you may need to remove the black plastic fender and side steps to give your screwdriver easier access. or if you have an Allen key that will fit the screw head, I recommend using it. tighten the screw until the air cleaner is firmly in place. don't over tighten!

re assemble any parts of the hard body you had to remove to tighten the air cleaner into place.

Put your body on and take your truck out for a test run!

Thank You For Reading And Have a Great Day!
-McCue RC