Fg 1/5 Scale Rc Race Car
USD $1,200.00
Condition : Used
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
FG 510 four-wheel
drive gas car
Somebody might ask why I'm selling this after all this work and the answer is I just purchased a genius for the new season coming up.
I purchased this car 2022 for racing at local track.
Although the car ran really well right out of the box it still had weak points compared to the more expensive cars.
With my experience of composite work and CNC machining I made many new design changes to adapt on road race car performance. Starting from the bottom up chassis is 7075 aluminum double layer in the front. On top of the aluminum there's another chassis layup carbon fiber with Matt in between four layers carbon fiber. This will easily solve the problem of the FG week chassis.
The belt drive system is nice from the factory of FG but it does have resistance creating drag. I machine the whole new housing for it that allows for more clearance gave 4 mm of play on the cog belt and machine a slot in the
of the carbon fiber to allow for more clearance on the bottom side of the belt. Converted to four wheel disc brakes and using CV shafts in the front to solve the problem of the dog bone shafts would come out on the track all the time,
To solve the problem with the weak servo from the FG I put in two quarter scale servos with plenty of torque to operate that four wheel brake and steering. At the same time built a carbon fiber upper plate to strengthen the front of the chassis even more which FG did not have in the factory car.
The clutch is a GPM three shoe adjustable with adjustable bell.
Pipe is a samba 8 tune pipe specifically for the FG.
Motor is a Zenoha 26 ESP top end from ddm and this is a legal motor for the sportsman class because it's four wheel drive where everybody else runs 23 CC.
The body is a Porsche GT3 rsr with vinyl graphics on it but has been raised so it shows contact marks also have new front clip for it.
All the factory parts that were removed from the car I also have be included plus extra parts for stuff that commonly used at the track. Because I put this car together on off season it has not seen the track yet so it will probably need fine tuning if run out of local track if ran on a parking lot it'll run just as it is just fine. I printed the Vinyl logos and I will print some new replacement ones that are screwed up and send them with the car.
Somebody might ask why I'm selling this after all this work and the answer is I just purchased a genius for the new season coming up.
I purchased this car 2022 for racing at local track.
Although the car ran really well right out of the box it still had weak points compared to the more expensive cars.
With my experience of composite work and CNC machining I made many new design changes to adapt on road race car performance. Starting from the bottom up chassis is 7075 aluminum double layer in the front. On top of the aluminum there's another chassis layup carbon fiber with Matt in between four layers carbon fiber. This will easily solve the problem of the FG week chassis.
The belt drive system is nice from the factory of FG but it does have resistance creating drag. I machine the whole new housing for it that allows for more clearance gave 4 mm of play on the cog belt and machine a slot in the
of the carbon fiber to allow for more clearance on the bottom side of the belt. Converted to four wheel disc brakes and using CV shafts in the front to solve the problem of the dog bone shafts would come out on the track all the time,
To solve the problem with the weak servo from the FG I put in two quarter scale servos with plenty of torque to operate that four wheel brake and steering. At the same time built a carbon fiber upper plate to strengthen the front of the chassis even more which FG did not have in the factory car.
The clutch is a GPM three shoe adjustable with adjustable bell.
Pipe is a samba 8 tune pipe specifically for the FG.
Motor is a Zenoha 26 ESP top end from ddm and this is a legal motor for the sportsman class because it's four wheel drive where everybody else runs 23 CC.
The body is a Porsche GT3 rsr with vinyl graphics on it but has been raised so it shows contact marks also have new front clip for it.
All the factory parts that were removed from the car I also have be included plus extra parts for stuff that commonly used at the track. Because I put this car together on off season it has not seen the track yet so it will probably need fine tuning if run out of local track if ran on a parking lot it'll run just as it is just fine. I printed the Vinyl logos and I will print some new replacement ones that are screwed up and send them with the car.
Price type
IN STOCK
OUT STOCK
.
