1/14 8X8 Roll Off Hydraulic Dump RTR Truck

1/14 8X8 Roll Off Hydraulic Dump RTR Truck Notice : This product is for experienced RC hobbyists. This is not recommended for anyone under the age of 16. Specifications: Hard Plastic European Style Front Cab Full Metal 3 Speed Transmission (Planetary Gears) Transfer Case (Billet Aluminum) Super Scale Leaf Spring Suspension Setup Scale Rims (Stainless Steel / Billet Aluminum) Remote Lockable Front and Rear Axles (Locking Differential) Full Metal Front and Rear Axle Housing Steel Scale Drive Shaft Realistic Front Cab Latch Molded Functional Fuel Tank Automatic Trailer Gate Controlled LED Light Modules Realistic Engine Sound Simulator Detachable Rear Dump Rear Light Guard (Protects Against Rocks) Scale Light Buckets (Fits 3-5mm LED) Recommended Payload: 10kg / 22lbs Maximum Lift Power: 42kg / 92lbs LiPo Cutoff Fully Painted Scale Wheel/Tire Cylinder Maximum Thrust: 109kg / 231lbs Brushed Driven Motor 930KV Brushless Motor-Driven Micro Hydraulic Pump Length: 680mm / 26.7in Width: 190mm / 7.48in Height: 270mm / 10.6in Weight: 10kg / 22lbs First Gear 1/113, Second Gear 1/86.4, Third Gear 1/62.1 (Transmission) Basic 10 Channel 2.4Ghz Radio Replacement Parts: Earth Digger 4200XL Excavator Brushed ESC (VVV-S0011) Required Parts: 5000mAh 11.1V 50C 3S1P LiPo Battery Pack with XT60 Plug (Battery size must be no bigger than 140mm in length, 45mm in width, and 25mm in height) Compatible Battery Charger 4x AA Batteries for Radio (Z-S1718) Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042) Optional Parts: Twister Extreme Hi-Voltage Coreless Metal Gear Digital Waterproof Servo (Z-E0125) Twister High Torque Metal Gear Digital Servo (Z-E0035) Hauler Super Wide 1.7" Commercial 1/14 Semi Truck Tires (Z-T0071) Long Haul 1.7" Commercial 1/14 Semi Truck Tires (Z-T0026) LoRider 1.7" Commercial 1/14 Semi Truck Tires (Z-T0066) Roady 1.7" Commercial 1/14 Semi Truck Tires (Z-T0032) Roady Super Wide 1.7" Commercial 1/14 Semi Truck Tires (Z-T0072) Notes: When raising the dump bed, do not leave at upper-most position for more than 2 seconds, doing so may cause damage to the hydraulic system. Do not push/pull the truck by the tailgate, doing so may cause damage to the locking mechanism. Do not use more than 3S battery. (11.1 volt(s)) Do not try to operate lift past its fully-extended height, doing so may cause damage to hydraulic system. Must turn on the transmitter before starting the ESC. ESC Supports XT60 Connector While some components may come assembled, we recommend checking the hardware and screws are all properly secure, especially after shipping. As an option, you may want to apply thread lock to some of the installed hardware. Use good quality hex drivers to avoid stripping screw heads. Use thread lock when putting metal screws into metal parts. Steps marked with an asterisk (*) require threadlock. Use threadlock sparingly. Do not over tighten screws, or you may strip the thread. This product is for experienced R/C users. Not recommended for beginners. The axle hubs can be removed, but may require additional force. This Product Is Professionally Pre-assembled